DEPZOL
Clock Wireless Charger SZ-06 (White Color)
reviews
Description
- This product is a wireless charger with a clock, allowing you to easily experience the magic of wireless charging.
Please read the manual carefully before using this product and keep it for future reference.
PRODUCT DESCRIPTIONS
① Display screen
②Wireless charging area
③On/off button
④ Mode switch button (M,△,▽)
⑤Alarm clock
⑥Temperature
⑦ Time
⑧Type-c input port
⑨ Reset key
PRODUCT CHARACTERISTICS
1. Size: 128x80x66mm
2. Weight:250g
3. Input: DC5V/2A, 9V/1A
4. Outpurt: 5W/7.5W/10W
5. Charging efficiency: ≥72%
6. Transmissino distance :≤8mm
7. Working frequency: 110-205K
8. Executive standard: Compatible with Qi wireless charging standard
PRODUCTUSE
1. The product is connected to the adapter and powered on through the equipped USB cable(This product does not include an adapter)
2. After the power is turned on, the display shows numbers 1-9 in turn, then PM; clock icons in turn, and finally stays to display tims and temperature.
3. Long press Reset Key(⑨) with a metal needle with a diameter of less than 1.4mm for more than 2 seconds, reset clock time=1/1/00:00
4. Setting the time mode:(When displaying the time, follow the steps below)
(4.1) Long press M: enter 12/24 hour setting, short press ▽/△ to switch, then short press M key to set time, set minutes and exit time setting.
(4.2) When entering the above setting mode:
Short press △: add hours, add minutes, 12/24 hour system switch;
Short press ▽: when decreasing, subtract minutes, 12/24 hour system switch;
(4.3) When displaying the time, long press △:
The temperature display C (Celsius)/F(Fahrenheit) switch.
5. Setting the year, month and day:
（5.1）When the time is displayed, short press M to display the date ; at this time, long press M to enter the setting year, set month, and set day in sequence; short press M again to set 3 alarms;
（5.2）When entering the above setting mode, short press ▽, set the year, month and day, and turn on ( the alarm icon will light up)/turn off the alarm.
（5.3）When the alarm clock icon is displayed, press and hold M to enter the alarm time setting, △/▽ to change the alarm time.
6. Digital project mode setting method:
When the time is displayed, short press △ to enter the DP seting, short press △ to change the 3 DP modes, and press M to exit the DP setting.
DP=1: Display 10s time, 2S date, alternate switching;
DP=2: Only display the time, not the date;
DP=3: Keep the current display:
7. During the display time, short press ▽ to enter the display brightness setting, short press ▽ to charge the 5 display brightness modes, and press M to exit the display brightness setting.
The display brightness is as follows:
0:Display brightness according to time;
1-4: The four levels of brightness increase sequentially;
5: Screen off mode after 5S.
In the setting mode, there is no key 30S to return to the display time state.
Wireless charging function:
1. Connnect the product to the power supply;
2. Place a mobile phone with wireless charging function on the product as shown in the figure to charge the mobile phone.
When charging, you can see the wireless charging logo on the display.
When charging, you can see the wireless charging logo on the display.
Tips:
When charging, please align the receiving area of the charging device with teh wireless charging area of the product to achieve the the best charging effect.
WARNINGS
1. Do not squeeze or bump
2. Do not disassemble or throw into fire or water by yourself to avoid short circuit leakage
3.Do not use the wireless charger in a severely high temperature, humid or corrosive environment to avoid leakage of electricity due to damage to the circuit
4. Do not place too close to a magnetic card (identity card, bankcard, etc.) with a magnetic stripe or chip to avoid invalidation of the magnetic card
5. Please keep the di stance between implanted medical equipment (pacemaker, implantable cochlea, etc.) and the wireless charger at least 20CM to avoid potential interference to medical equipment
6. Children should be taken care of to ensure that they do not use the wireless charger ads a toy to avoid unnecessary accidents.
7. Please keep the wireless charging area away from water other liquids
8. If you need to clean the charger, please make sure the power is disconnected
9. The use environment temperature is kept at 0-45℃
W
A
N
I
